• SERVICE HOTLINE:400-018-3868

Fiber Laser Cutting Machine

    HECF4020VWJ-4000W Fiber Laser Cutting Machine

    • Fiber Laser&YAG Laser
    • Brand :HE Laser
    • Weight:Based on requirement
    1. Detailed information

    100.jpg

    >>The machine description
     Laser cutting machine is a set of optical, mechanical, electrical integration of laser processing equipment, which uses laser technology and computer control technology and high-performance CNC laser power system, can quickly and efficiently processing a variety of metal sheet. HECF4020VWJ-4000W laser cutting machine is a new generation of safe, efficient, energy saving, environmental protection, high power large format, fast exchange full protection zone ventilation laser plate cutting processing equipment, processing fast, small cutting, and thermal effect is small, especially for metal sheet processing

    >>Technical Parameters

    Machine Model

    HECF4020VWJ-4000W

    Laser Output Power

    4000W

    Laser wavelength

    1068~1080nm

    Beam quality

    3.5~4mm*mrad

    Min line width

    ≤0.15mm

    Cooling method

    water cooling

    Max cutting area

    4000mm×2000 mm

    X-axis travel

    4000mm

    Y-axis travel

    2000mm

    Z-axis travel

    More than 250mm

    Worktable axial positioning accuracy

    0.05mm/m

    Repeated positioning accuracy of the table

    ≤±0.03mm

     

    >>Cutting process parameters
    The following table for the HECF4020VWJ-4000W laser cutting machine were cutting carbon steel and stainless steel, the maximum cutting thickness and high-quality cutting thickness range for reference.
      

    Material

    Max Cutting Thickness/mm

    Best Cutting Thickness/mm

    Carbon Steel

    25

    0.5-20

    Stainless steel

    12

    0.5-10

     

    >>equipment work and environmental requirements

     

    SERIS NO.

    CONTENT

    1

    Machine input power:34.75kW

    2

    Power supply requirements:(It is recommended to use a regulated power supply)

    Rated output voltage: 380V/50Hz

    Voltage stability:±5%

    3

    Compressed air supply(It is recommended to configure a gas tank, cold and dry machine)

    Volume: 1 m3

    Preset pressure:>1.0Mpa

    Air flow:>0.6 m3/Min

    4

    Auxiliary gas

    Cut auxiliary gasPurity requirementsO2≥99.95 %N2≥99.99 %

     

     

    Device installation environment description:

     1. Fiber laser environment requirements: temperature at 15-35 ℃, relative humidity less than 85%.2. Site power distribution cabinet: 380V, 50Hz, three-phase four-wire, with short circuit protection.3. The equipment shall be fitted with a dedicated earthing with a grounding resistance of not more than 4Ω.4. Provide the necessary lifting equipment and personnel.5. Provide equipment on-site commissioning required materials such as steel plate.6. The auxiliary conditions required for the laser cutting equipment to work properly:    1) cutting auxiliary gas (N2, O2);    2) waterless oil-free compressed air supply system.7.Equipment space and foundation requirements:the foundation for the concrete ,the minimum thickness of 300mm;around the ground without the source or set the damping groove. Cutting Samples:

    1428359609_1472428032.jpg

    Contact Us

    Phone:86-27-65332978

    Fax     :86-27-65332979

    E-mail:export@helaser.com.cn

    Address

    No.106, Guanggu Road, East Lake New Technology Developing Zone, Wuhan City, Hubei Province, China